What Is The Fastest Way To Stain A Fence?

Is it better to spray or roll stain on a fence?

Spraying vs.

I recommend using an airless sprayer when applying wood fence stain.

Using only a brush and roller for this project is extremely time consuming and labor intensive.

Use a sprayer to quickly apply the material on the surface and a brush and roller to push the material into the wood..

How much should I charge to stain a fence?

Cost to Paint or Stain a Fence The price of having a professional paint or stain your fence averages $2,000. Homeowners could pay anywhere between $750 to $4,250 depending on the condition, height and length of the fence. Costs average $3 to $17 per linear foot or $1 to $2.50 per square foot.

Is one coat of stain enough?

So, if you have the color you desire, then stop. More coats will add a little more color, but they do not build up a protective surface coating. … If you are happy with the color, you’re all done with the staining stage of your project. Now it’s time to seal the wood with a film finish.

Do you have to remove old stain before restaining?

Yes, it would be best if you stripped, remove the old stain before you restain. If the stain on the surface of your deck is old, worn out and peeling, the first thing you should do in your quest to renew the deck is to remove all the old stain. Solid deck stains offer much-needed protection to the wood.

How often should I pressure wash my fence?

Pressure wash your fence annually to keep it looking like new. You shouldn’t have to apply fresh paint or sealant every year, but you should reapply it every few years or so to keep it protected. By Jim O.

Can I use a roller to stain a fence?

Even out any drips or puddles before they dry. For more professional-looking results, use a sprayer or roller to apply the stain first. Follow with back-brushing to eliminate drips and runs. Stain pads do an excellent job of applying the correct amount of stain, especially on smooth wood.

What happens if you stain over stain?

1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

What happens if you only stain one side of a fence?

A question that customers sometimes ask is whether both sides of the fence should be sealed. … In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.

Should you sand a fence before staining?

2. Strip or Sand Fencing (If Necessary) If you’ve previously stained, varnished, or painted your fence, you’ll want to strip off any finish that’s remaining before you apply a new coat of wood stain. … If it beads, you’ll need to lightly sand the fence (in the direction of the grain) before you can stain it.

What time of year is best to stain a fence?

FallFall Weather Keeps Your Deck Dry for Applying a Stain More specifically, the moderate temperatures of early fall are optimal for staining, as the later fall weeks may bring colder days that are too chilly for your stain.

Is it better to stain a deck with a brush or roller?

You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. If you see that too much wood stain has been used in an area, use a roller or brush to fix the imperfections.

How long does it take to stain a fence?

A good rule of thumb is to wait a month or two if the fence is made with dry materials. This will allow it to weather enough but not too much. If the fence is made with pressure treated materials it may be 3-4 months for the posts to dry enough and can be checked with a moisture meter.

Can I use a roller to stain wood?

You can use any tool – rag, brush, paint pad, roller or spray gun – to apply the stain. You can even dip the object into stain or pour the stain onto the wood and spread it around. It’s only important that you wipe off all the excess before the stain dries.

Does staining a fence make it last longer?

Stain, Stain, Stain! An exterior decking stain will bring out the natural color and grain of the wood and will seal and protect from moisture and sunlight. Stain will also make your fence last significantly longer. … Plan on re-staining your fence every three to five years for optimal protection and beauty.

How many gallons of stain do I need for a fence?

For a small fence, up to 175 square feet, you will only need one gallon of stain, in any transparency. If your fence is larger, up to 550 square feet, you will need to buy 2 gallons of stain. For very large fences, up to 700 square feet, you will need 3 to 4 gallons of stain to complete the project.

What is the easiest way to stain a fence?

The easiest, most productive way to spray a very large project like this is to use an airless sprayer. An airless unit draws stain or paint directly from a paint canister and sprays at pressures up to 1,700 PSI.

Can you stain a fence right away?

New fences should not be stained right away. The type of wood used in your new fence will influence when, approximately, you should stain it. Wet wood won’t allow the stain to properly penetrate the wood grain and protect the wood. … If the water soaks into the wood, it’s ready for stain.

What is the best color to stain a fence?

If you’re considering stain colors for a privacy fence, you may want to stick with commonly used colors like a warm cedar, rich redwood or dark brown.

Do I need to power wash fence before staining?

Before applying any type of finish to a fence, including stains, you need to remove any old finish(es) and remove any built up dirt, dust, grime or other substances from the fence. … Pressure washing a fence before staining it will also ensure blemishes are removed that could show through the surface of the stain.

How many coats of stain do I need for a fence?

In most cases, solid-color stains are like traditional paint and need just one coat to protect your fence. Semi-transparent penetrating stains often need two coats, with the second coat applied approximately an hour after the first coat.

What is the best sprayer for staining a fence?

10 Best Sprayers for Staining a Fence – ReviewGraco Magnum X5 (Best Overall) … Scuddles Paint Sprayer (Best Budget) … Fuji Spray 2203G Semi-PRO 2 (Best HVLP Sprayer) … Chapin International 30600 (Best Hand Pump) … Wagner Spraytech 0529010 (Best for Detailed Finishing) … Goplus Paint Sprayer (Best for Beginners)More items…•

How many coats of stain should I use?

The general rule of thumb is to apply only as much deck stain as the wood can absorb. Typically this will be 2 coats, unless your dealing with extremely dense hardwoods which may only be able to absorb 1 coat of wood stain. Watch this video to see more tips on how many coats of stain to apply.

How long after pressure washing Can I stain?

It depends on the weather conditions, but the average drying time for a jet washed wood is 48 hours. If you want to be extra sure it’s dry enough to stain, you can wait 72 hours before staining. Always inspect the decking before applying the stain.

Can I stain over stain without sanding?

Gel stain will not require you to sand the product to a raw wood finish. It can be applied over only lightly sanded pieces just as well.

How long do you let stain sit before wiping it off?

Don’t worry about being neat; all that matters is getting a nice, even, liberal coat over the wood. At this point, wipe the stain off immediately for a lighter tone, or for a deeper tone, leave it on for five or even 10 minutes before wiping.