Quick Answer: How Much Does It Cost To Insulate A 1500 Sq Ft Attic?

Can you over insulate an attic?

But there may be a theoretical point of “too much.” If a home is over-insulated and is too tightly sealed, moisture can get trapped inside.

Without proper ventilation, a home can build up too much moisture, especially in the attic (warm air rises), which can cause mold problems and, overall, lower indoor air quality..

What is the best type of blown in attic insulation?

Fiberglass, cotton, and mineral wool can all work as loose-fill material, but the far and away top choice for blown-in insulation is cellulose. Contrary to batts, blown-in cellulose insulation is perfect for filling in tight voids around wiring, pipes, or any area with awkward framing.

What type of insulation is best for attic?

Loose-fill fiberglass attic insulation still experiences convection, but not nearly as much as old fiberglass used to. If you check with the North American Insulation Manufacturers Association, they’ll assure you that fiberglass or mineral wool is definitely your best choice for attic insulation.

Should I remove old attic insulation before adding new?

According to ENERGY STAR®, you can put new insulation over old insulation, “unless it is wet. … “Faced” insulation should not be placed on top of existing insulation in the attic. Any new roll or batt insulation installed over existing insulation in the attic needs to be without a vapor retarder (face).

How long does insulation last in the attic?

20 to 30 yearsThe typical lifespan is 20 to 30 years, with degradation beginning as early as 15 years after installation. As with other types of insulation, severe weather or outside interference can reduce the lifespan. Note: cellulose is often used as supplementary insulation.

How much does it cost to insulate a 1200 sq ft attic?

How much does attic insulation cost? The pros charge $1,500 to $2,000 to do a 1,200-sq. -ft. house.

How much is attic insulation a square foot?

Attic Insulation Cost On average, most homeowners spend between $813 and $1492 or $1.50 to $3.00 per square foot to install attic insulation. Pricing depends on the size of your attic, the type of insulation material used, and labor rates.

How many inches of insulation do I need in my attic?

The higher the R-Value, the better the thermal performance of the insulation. The recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.

Which is better attic insulation blown or rolled?

Rolled fiberglass insulation scores an R-value of 3.7. So overall, rolled fiberglass insulation is slightly more effective at blocking in and out heat than its blown counterpart.

Is blown in insulation worth it?

Unless your home is relatively new, you will almost certainly benefit from installing blown insulation in your attic. It will make your home a more comfortable place to be in summer and winter, decrease the cost of your energy bills, and increase the value of your home.